Відео

Hello Marty the GA 4000 is a definitely a better motor in my eyes is capable to swing a large carbon fibre. Prop are used carbon fibre because the motor can pick up a lot faster and if you are 3-D flying. Fly save Marty.

Falcon Carbon prop is good. A little bit costly but if you are 3D then is worth the cost the motor will spin up quickly with no lag. Fly safe

Hello there. That is the reason I don’t fit XPWR motors anymore due to the motors can be problematic with ESC. Fly safe 👍

Hello John. I am just doing ok I think. I had been watching some of my old videos on my UA-cam channel. How are you doing have you been to see your grandchild for your first time?

@@dannyporter888silverfox8 glad your ok Danny, maybe you should think about doing some more short video’s to get you motivated again? Going to Australia in October for a month & we are all going on a holiday to Fiji for 7 nights all inclusive & will be great with the twins, daughter & husband & our other Daughter who is travelling around Asia is also coming to Fiji so there will be 7 of us. We are in Lanzarote at the moment for 15 nights😁 I know your in pain but thinking about a short video content & getting up and about your home to make a video maybe including the accident & your recovery will do you the world of good both physically & mentally 🤞😁👍

Check to see if your motor and ESC getting hot if is ok is the noise coming from high or low rev or vibration. Also check for prop noise with changing props. Check the bearing by pulling on the prop for play. 👍 fly safe

@@dannyporter888silverfox8 Hi Danny, Thank you for your quick answer! At the moment I am using not the most efficient propeller. That could be the solution, will keep you informed.

You are best to program the ESC with a program card for the timing and breaking and all depends with which motor you are using. I always program mine so the motor will not get too hot and end up damaging the motor and the ESC. Fly save walterstimax 👍

Thanks Danny Makes sense. I'm building a l30 Black horse 90mm Schubeler With 12s system using this 160 castle Esc and I need to get I right. Thanks for the Help My friend.

Also, what Bec would you recommend for the 160-castle esc?

I have used a 20amp BEC by Castle creation on mine. How ever is up to yourself what you want to use. Fly safe Walter 👍

Thanks Danny

I got mine from nexus model. Type in the search bar tachometer and you well see it there. Fly safe 👍

Hello John. I am getting better and how about yourself have you been flying? And how’s your eyesight now?

@@dannyporter888silverfox8 hey Danny, glad to hear your feeling a bit better, I’ve been flying and putting together some new ARTF planes. Off on holiday very soon to Lanzarote for a couple of weeks then to Australia & Fiji for 5 weeks latter in the year to have our first hug with our now 1 year old twin grand daughters so that will be nice. My eyes are as good as they are going to get now, just the floaters are a nuance but got use to them. Weighting to to a consultant about a hernia I got from coughing for a month with flu at Xmas, only had telephone appointments & 1 visit to have a ultrasound, I’m afraid the NHS is in a right mess, 4 months is a long time to weight to be seen & the bloody hernia hurts & need to be careful bending down & picking things up. Are you able to get out yet & how you filling your days up now?? Take care🤞👍

Yes it does come with standoffs or At lest mine did. Fly safe Briankoch.

@@dannyporter888silverfox8 Thanks for the reply, Danny. Did you use some additional spacers with your standoffs? The length Dualsky provided me when using the standoffs has the prop hub of the motor about 10 mm short of where it needs to be so wondering how you compensated for that as yours looks the perfect distance once the cowl is on.

Hi Brian, yes I did have to use small amount of additional spacer as you can see right at the end of the motor to get the distance right.

Hello John. I’ve been spending a lot of time in bed in pain. I have also received a letter from the surgeon to say my bone growth will carry on growing but at a slower rate so the verdict is I will be in pain for the rest of my life till I die, not good for me however just got to carry on as best as I can. Thanks for asking John. Anyway I haven’t been in touch because I’ve been feeling quite down and low about myself. How are you? Have you been flying much and how are your eyes now, have they improved? Oh, and did you enjoy your holiday? Care Danny.

@@dannyporter888silverfox8 hi again Danny, I guessed you were not feeling great☹️ I know that your in a lot of pain but it will get less over time. You have two choices my friend, 1, to give into what has happened to you, don’t do all the things you use to love like flying, vlogging etc because your in pain & finding things difficult. 2. DONT focus on what you CAN’T DO at the moment. Try to be positive about getting as well as you can get & set small steps to recovery every day. START by thinking about the content of your next vlog!!! THEN MAKE IT IN STAGES, A BIT EVERY DAY. It will do your mental state the world of good!! ALSO CONTACT your flying club mates & GET DOWN THE PATCH for some interaction with people with the same interests. YOU MUST DO ALL YOU CAN TO MANAGE YOUR MENTAL WELLNESS. Being at home just dealing with pain is NOT good for you, you are still alive when you should not be after the horrendous accident & got a long life ahead of you so YOU must do all you can to make it as best you can🤞you could make a vlog a little bit each day then edit it so it looks like a coherent video. Me, my eyes are as good as they are going to get so just fly a little bit closer than I use to. Had some good holidays & just booked to go to Lanzarote & booked 5 weeks in Australia to meet the twin grand daughters we only seen on face time. They are miracle girls that should not be here & born very early & could fit in the palm of your hand. After many weeks in hospital they are now 18 months old & are doing very well, thank god🙏 they are real fighters! Our other daughter who is travelling the world back packing is in Bali & we are all meeting up for a week in FIJI for a week which will be great🤞. I also got the worst flu I’ve ever had just after Christmas even though I had the flu jab, it lasted 5 weeks & couldn’t stop coughing, so much so it gave me a large hernia that stopped me doing a lot. My club mates asked me where I was & when I told them I can’t bend much, on a Wednesday, one of them picks me up, packs all the stuff in there van & takes me to the patch, they even set everything up ( I made a SLEC folding model stand with a table for something to do when unwell) it took me a couple of weeks to make it a little each day but it’s great now I don’t have to bend over at the patch. I see a consultant on 30th May to see about an operation to put it right but long long waiting lists. Stay in touch and DO what I suggest, it will do you mental & physical state the world of good🤞🤞🤞🙏🙏

@@dannyporter888silverfox8 hey Danny, I’ve sent a long reply to your comments already but just speaking to my partner Sue who 9 years ago contacted bowl cancer. She needed a lot of radiotherapy & endless chemo before the y killed the cancer, unfortunately the amount of treatment was to much and the after effects were very bad, one of them being fibromyalgia (total body pain caused by damaged nerves) she was on strong pain killers including morphine which was turning her into a zombie at aged 53. She managed to keep asking for help & eventually her cancer consultant signed her up for a 5 week residential pain course at st Thomas’s hospital in London with about 8 other participants. It was life changing but not easy. She only take paracetamol now when she needs it along with many other drugs to keep the cancer damage. She is still in touch with all the other participants & has a strong support group. She told me to say to you Don’t TAKE NO for an answer, keep insisting for a place on the pain management residential program as it improved her life so much🤞👍🙏

@@dannyporter888silverfox8 hi Danny, you have 2 choices now after your horrendous accident. 1. To stay at home not doing very much or doing the things you love like flying & vloging thinking about what you can’t do….. you hopefully have a long life ahead of you, don’t let it be miserable & boring. 2. Start to manage things by doing what you can do, why not think about the content of a short vlog that you could make over a number of days then edit it to be coherent. THE MOST IMPORTANT THING is to manage your mental wellbeing though, contact your flying club & get someone to pick you up just for a social at the patch. Get on a pain management programme, start vlogs again. Get a mobility car to get you around, they are virtually free as my friend has one for dodgy knees. ask your doctor to help with your mental wellbeing ( not more bloody drugs though)Take control of your life & make it better🤞I had the worst flu ever & had the Jab, it lasted 5 weeks with constant coughing that gave me a hernia that hurts when I stand or bend. See the consultant 30May but long waiting list for the operation. So I made a SLEC folding model stand with table to take to the patch so I don’t need to bend much. It took2 weeks to make doing a little each day. some of the guys pick me up in there vans with all my stuff & take me to the patch on Wednesdays, they even set everything up for me too as long as I make the tea😁my eyes won’t get any better now so just fly a bit closer than I use to. KEEP in touch mate🤞

I hear what you are saying. If money is important to you then you have to do what you feel is right because if you listen to anybody else and if it doesn’t for you then you will be ending up kicking yourself. Do you know what I mean bro?

@@dannyporter888silverfox8 yes of course

This is a 78” model. 😊

@@dannyporter888silverfox8 👍 thanks

Hi feefifofum. 25x9 falcon carbon prop. DUALSKY GA 6000.8 motor 60cc. Castle creation Phoenix edge ESC 160amp You will need a separate BEC 20amp because the Phoenix edge ESC does not have its own BEC built-in. I have also copied a link you can click on to watch the video explaining it all. ua-cam.com/video/AiBJtuEYhR8/v-deo.htmlsi=qj7TyqbxeifM9S_V

@@dannyporter888silverfox8 thanks for your quick reply, really appreciate it. Are you still flying it and would you rate that prop and motor as a good match for this model as i have the same airframe and wondering whether to go petrol or electric

I enjoy my 84” slick the video you seen was the maiden first flight and it went brilliant very powerful motor it will hover forever till the battery runs low. With going petrol, there will always be a delay in the throttle different way of flying.. I am more of a 3-D pilot than sports pilot. Fly safe

Hello there. The ignition battery capacity is 4000mah. Fly safe 👍

Balance it on the CG pending on what motor or engine you are using, then put the weight on to make the balance point on the CG. Because different motors have different weight so you may need to add little weight either front or back. However the balance point it will be written in CG inside the fuse are large. fly safe

Thank you Dave Johnson 👍 fly safe

Hi radukapu. Yes that is how the motor is fitted to the fire wall the down thrust is in the fire wall is like that so it can fly level with neutral elevator trim. Fly safe 👍

@@dannyporter888silverfox8 Hi Danny thank you for your reply and clarifying i thought i i'm not sure it's better to ask an expert ;) Fly safe

Hi greedfox. The higher the c rating is that should stop your battery from puffing or toasting. The higher the c rating is will make the amperage draw quicker.

@@dannyporter888silverfox8 I bought a pair of yowoo off of amazon and they send me a box full of sand. >:/ I am pissed and I'm really sure that amazon will deny my return because all I have is a box of sand. it was a sealed box, like with shrinkwrap so the company knows what they are doing.

Thank you 👍

Hi there john. My recovery is very slow. Everybody I know has caught the flu and it must be a very bad thing going around you. Just be careful John and hope you get better soon and when I am down at the field flying I will let you know. Thanks and have a good Christmas bye for now.

Hello John. I thought I replied to your last message. I am slow with recovering from the last operation. How are you doing how are your eyesight with your operation?

@@dannyporter888silverfox8 glad your ok Danny, I’m doing ok but do have floaters in my eyes now but getting use to them. I don’t want to be nosy but was the operation to repair damaged bones or internal stuff & can you get out & about yet? How are you keeping mentally well too?. I’m excited as got a durafly gloster gladiator on its way to me from Uk hobby king. I loved the look of the real plane probably 5 years ago, it was the first closed in cockpit fighter but still a bi plane. It’s only 44” wingspan but a well detailed copy of the real thing & reviews say it flies great & looks great. It was hard to get as only 5 were sent to Uk hobby king new wearhouse & went out of stock instantly!! Keep well , & stay in touch🤞

@@dannyporter888silverfox8​​⁠ glad your ok Danny, I’m doing ok but do have floaters in my eyes now but getting use to them. I don’t want to be nosy but was the operation to repair damaged bones or internal stuff & can you get out & about yet? How are you keeping mentally well too?. I’m excited as got a durafly gloster gladiator on its way to me from Uk hobby king. I loved the look of the real plane probably 5 years ago, it was the first closed in cockpit fighter but still a bi plane. It’s only 44” wingspan but a well detailed copy of the real thing & reviews say it flies great & looks great. It was hard to get as only 5 were sent to Uk hobby king new wearhouse & went out of stock instantly!! Keep well , & stay in touch🤞

Hello georgelotus9272. No I didn’t use any carbon reinforcement inside of the fuselage.

Hello roelmichielsen9819..What do you mean by servos placing?

You need to contact the shop where you bought your model from.

Yes they are good motors. I have 3 of them.

I have to be careful what I say on here I don’t want to be sued for speaking my mind I know what works for me and what’s good for me and if you guys want to follow that’s up to you guys. it’s down to you guys to decide what you want to do it’s not up to me. I’m here to express my experience in a diplomatic way so I don’t get sued.

​@@dannyporter888silverfox8 sued?? You can't get sued giving your "OPINION" CMON BRO.!

You'll find the Yowoo graphene are the best. The HRB are OK, everything else is dog shit after a few runs.

A Bec is short for battery eliminator circuit. 👍

Hi there radukapu. First you need to check your radio settings making sure it’s not got any movement mix in the controls like keep your plane on the ground without your motor running use the control to bank to the right and making sure the elevator do not move or any other controls do not move next is checking all your radio equipment sounds like when you said putting the controls in nothing happens to me sounds like you have radio issue check the rate of movements on all the controls. secondly I want to know what kind of pilot you are. Are you a 3-D pilot or pattern/ sport pilot it makes a big difference to where your CG should be. 👍

@@dannyporter888silverfox8 Hi Danny. Thank you very much for your reply. As i plane pilot ’m more sport style not hardcore 3D . My experience 12 years 3d helis and few foamies now getting imore seriously into planes. I’m pretty skilled builder but got really confused by CG. As i was sourcing out info some guys say that the marked cg is slightly forward so being on the rear edge ( or somewhere around) of wing pipe I should be fine. I really felt unsure adding over 200 g of dead weight to the front . Never heard anyone doing that. Also when measured the plane from tip of the cone to the edge of the tail it was around 70mm longer than measurement in manual. They say 1661 mm mine 1730 mm . I’m now thinking if i made a piloting error and entered banking on low speed and lost lift. Maybe extra ng needs slightly higher speed to fly well? Thank you Radek

Hi radukapu. I will check with my flight stocks to see where the CG should be and if I put any weight on them. I am In hospital at the moment so will not be out today. Will check for you soon as I can.Is your NG a pilot plane? 🙏👍

@@dannyporter888silverfox8 oh no rush. Please get well soon that’s most important! Yes it’s Pilot rc extra NG 67” I can send some pics somewhere.

Hello radukapu. I sent some one to check my pilot 67” and the CG on my model is just at the rear edge of the wing tube. No weight needed on my model with very hight movements on all the controls and that model flies great 👍.

Hello radukapu. I didn’t need to add weight on the front. I fly3D so all my models is slightly tail heavy sometimes I even have to add weight right at the end of the rudder post. wherever the CG is marked on my aircraft I can fly with maybe 5 to 10 millimetres off central gravity at the back due to 3-D flying mainly stalling the aircraft to get manoeuvres. Have a look at some of my Maiden flight. I push the aircraft into manoeuvers soon as I have clearance of the ground and I fast roll on takeoff maiden flight and is very precise have a look at the maiden flight on the yellow extra going into a fast roll on takeoff with enough clearance of the ground maiden flight see what you think. 👍

Hi Jasonkrantz. Thank you for visiting my chancel. 👍

Hi there fordever. Have you checked your Ariel and also when you are binding don’t be too close to the receiver if you do you will get problems With receivers try it that way first before you mess with programming that’s what I would do however if you are looking at reprogramming then it’s something you need to contact spectrum when you reprogram I think they might give you a code maybe a password. Fly safe 👍

Your specific cause may be different from mine but I had the same rebinding after every power down issue with my 10360T. My problem was that I had a separate BEC providing power into the bind/srxl2 port but I was using the wrong lead from the Castle Creations BEC. I was using the 3 pin lead with the signal wire and I only needed to use the other lead with the 2 pins (positive and ground) with the signal blank and then it never gave me that problem again. Hope this helps someone if they get that same issue.

Yeah I hear what you are saying and I good to know that Alwaysflying6540.Thank you for visiting 👍.

Hi alwaysflying6540. How do I put my videos into playlist I am struggling with this. Good if you can help if not I will keep trying.

@dannyporter888silverfox8 I don't know how. I'm just thinking of starting my own channel. I notice that you have good video's that I watch while building. If they were in a playlist, they would be in order and play one after another. It's just easier for the viewer's to follow your progress